About the 620STD 0007 400 0010 US ENW 0000 000 B0 000 000
620STD 0007 400 0010 US ENW 0000 000 B0 000 000 is a standard AC drive designed for the Eurotherm 620 Vector series. Uses for this drive are best developed for AC induction motors using analog setpoints and logic controller systems. The device provides users with a high performance control system for speed. Measured motor speeds rate at 0.75kW. The rated nominal input voltage the drive can accept measures between 380 and 460 VDC. Developed for US standards, frequencies of the drive are set at 60Hz.
I/O capabilities for the 620STD 0007 400 0010 US ENW 0000 000 B0 000 000 are expanded to allow for both analog and digital transmissions. Two programmable analog outputs as well as three programmable digital outputs (rated at 24VDC) are integrated into the drive. Five analog inputs are available, with four of them capable of being programmed. Digital inputs for the drive rate at 24VDC and control function such as Run, Fast Stop, Coast Stop, Jog, Enable, Ramp Hold, and three presets that can be specified by the user. A factory installed brake power switch is the drive’s on board braking option. Featured on the drive is a man machine interface (MMI) system. This 32 character alphanumeric device allows users to access system information with ease.
Manufacturer provided installation and storage parameters should be followed to preserve the drive. 620STD 0007 400 0010 US ENW 0000 000 B0 000 000 is enclosed in a IP20 rated mounting panel. When operating on a line, ambient temperatures must fall between 0℃ and 50℃. Wiring and installation instructions are found in both the device manual and datasheet. Technical support was originally provided by Eurotherm.
Our friendly and knowledgeable team at AX Control is available to assist with all of your automation needs. To receive current prices on all parts and repairs, please contact a member of our sales team by phone or email.
